Dragon's Eye News - Tutorials

VRP-M Lessons Learned

nospam@example.com (Michael Harrison) — Tue, 25 Sep 2007 13:17:10 -0700

For almost two months now, I've been working to figure out the exposure and processing steps to use in order to get bright and clean transmission holograms using my Coherent 315M and VRP-M film.

After blowing through roughly 68 pieces of film (mostly 1.5x1" in size) I think I've finally nailed the process to use for transmission masters.

Continue reading "VRP-M Lessons Learned"

Safelight for the computer

nospam@example.com (Michael Harrison) — Sat, 25 Aug 2007 23:02:41 -0700

If you find yourself needing to take your laptop into the lab, you can make life simpler by making a safelight cover for the screen.

I know most of you who make holograms don't carry around a tablet and those who carry around one probably don't make holograms but for others who, like me, do both, here's a way to take the computer into the lab without having to turn the screen off while film is out and about and you can save your "night" vision for what is probably a dimly lit lab.

Continue reading "Safelight for the computer"

Developer Saver (tm)

nospam@example.com (Michael Harrison) — Tue, 02 Jan 2007 09:38:59 -0800

If you're a holographer and you're like me, you use your developer for as long as you can before throwing it out.

Some people will preserve their developer by floating another tray on top of it but that's never appealed to me because it's messy and I would need a place for the "lid" to sit and drip while I'm actively using the developer.

For some time I've been using various forms of tupperware which has worked pretty well and I just recently decided to give a combination of Biokips and Wine Savers a shot.

Continue reading "Developer Saver (tm)"

Aligning an external mirror laser

nospam@example.com (Michael Harrison) — Tue, 22 Aug 2006 05:09:00 -0700

For several weeks I had a functionally dead Spectra Physics 907 laser. This was especially bad because this laser is the one I use for mastering my holograms which meant I couldn't make anything new until it was fixed.

During those weeks I picked brains and websites far and wide and managed to get the laser lasing again (several times in fact) but couldn't get the beam quality back the way it was before I screwed it up. I ended up enlisting the help of a local laser expert and was able to get beam power and quality back where it needed to be.

What follows is a tutorial on how to re-align an external mirror laser. Most specifically the Spectra Physics 907. I also include some tips on cleaning the mirrors and removing stuck boots.

Before I go any further I want to thank the following people:

The guys at the Holography Forum who provided suggestions for getting the beast aligned. Tony, BobH, Wler, Colin, Ron Michael, Martin, JohnFP, dcgman.

Sam Goldwasser for making public such a treasure-trove of information about lasers.

Tom Ehrichs for spending time cleaning and aligning the laser. I gained as much by watching him work as I did by him working.

Continue reading "Aligning an external mirror laser"

Leveling magnetic bases with epoxy

nospam@example.com (Michael Harrison) — Mon, 10 Jul 2006 10:54:25 -0700

If you're using machine shop magnetic bases on your holography table you've no doubt discovered that they wobble a bit.

This is a definite no-no when it comes to holography as that creates a weak point where vibration can continue to exist in your table.

The best way I've found to level the bases isn't to sand them level but rather to use epoxy to let gravity quickly level them for you.

Continue reading "Leveling magnetic bases with epoxy"

Extending valve stems

nospam@example.com (Michael Harrison) — Thu, 06 Jul 2006 04:59:04 -0700

If you're putting together a holography table on a budget, chances are good you'll be using inner tubes as the primary isolation medium.

Chances are also good that you'll need to adjust the pressure in the tubes once everything is piled on top of them.

Here's one method for extending the valves so you can adjust the pressure anytime you need to.

Continue reading "Extending valve stems"

Photographing reflection Holograms

nospam@example.com (Michael Harrison) — Sat, 24 Jun 2006 13:47:00 -0700

Getting a good photograph of a hologram isn't always an easy proposition but if you use the right tools and are patient you can get excellent results just about every time.

This tutorial assumes you have full control of the hologram and can take it off the wall at will. If you're trying to take a picture of a hologram that's permanently mounted to a wall or one where the owner won't allow you to move it, you'll need to adjust accordingly.

Continue reading "Photographing reflection Holograms"

Optic cleaning with collodion

nospam@example.com (Michael Harrison) — Sat, 03 Jun 2006 09:16:19 -0700

This could also have been called optic destroying with collodion. You'll see why in a bit.

Based on my first three attempts, I wouldn't recommend bothering to use collodion with cheap mirrors.

Collodion is used for a number of applications, such as cleaning optics used in astronomy. It was recently mentioned on the Holography forum as a way to clean our precious mirrors and lenses.

Here's the first mirror with a tape dam at an angle which attempts to show all the crud on the mirror. It's not excessively dirty like you might get with optics used in astronomy but it's dirty enough that it's interfering with my reference beam light. The mirror is used to steer the light coming out of my spatial filter up to my collimating mirror and needs to be as clean as possible. Note that this was a cheap $1 mirror I bought at a local electronics shop.

Continue reading "Optic cleaning with collodion"

Cutting glass

nospam@example.com (Michael Harrison) — Sun, 05 Feb 2006 08:00:00 -0800

Cutting glass isn't hard and if you're budget minded won't cost much. Some of the benefits of learning to cut your own glass are:

Custom sized plates. If you make your own plates or film sandwiches you can make more anytime you need at a lower cost than going to the local glazier.
Hologram framing. Framing your own holograms can save you quite a lot of money. One part of this is cutting your own glass either for standard frames or custom sizes.
On-demand glass. If you keep a few large sheets on hand you can cut your glass when you need it rather than buying it when the stores are open.

Note that the instructions which follow assume a right-handed user. If you're a lefty you'll need to adjust accordingly.

Continue reading "Cutting glass"

Making a safelight

nospam@example.com (Michael Harrison) — Wed, 01 Feb 2006 08:00:00 -0800

Making a safelight for use with red sensitive film (actually any monochromatic film) is easy and by using the right materials you can make a light that is both bright and won't fog your film.

You might be tempted to use LimeLites and while that will get you by for quite some time, just as nothing beats a spatial filter for cleaning up a reference beam, nothing beats a bright and truly safe light.

You don't have to break the bank though.

Continue reading "Making a safelight"

Plasti Dip for holography

nospam@example.com (Michael Harrison) — Mon, 30 Jan 2006 14:40:54 -0800

Everyone making holograms uses something a little different for handling film and/or plates when developing.

In my case I use forceps that I bought at the local electronics supply shop.

To keep them from scratching the film, which they'll do very well out of the box as the jaws have extremely sharp teeth, I coat the tips with Plasti Dip to give them a somewhat hard coating that grips film and glass equally well.

Continue reading "Plasti Dip for holography"

Removing laminated film cleanly

nospam@example.com (Michael Harrison) — Sun, 29 Jan 2006 21:26:29 -0800

Any of you that are using Kapco or a similar material for laminating film to glass have undoubtedly had a failure and needed to remove the film from the glass. You've also probably found that the longer the film is on the glass, the harder it is to remove the film and laminate cleanly without leaving bits of adhesive behind. Paint thinners work but are more difficult to use than you might think.

Continue reading "Removing laminated film cleanly"

Laminating update

nospam@example.com (Michael Harrison) — Fri, 25 Nov 2005 12:29:45 -0800

I've updated the Laminating Film to Glass tutorial with pictures.

Click just below to get the link.

Continue reading "Laminating update"

Extending developer life with press-n-seal

nospam@example.com (Michael Harrison) — Tue, 11 Oct 2005 05:15:00 -0700

If you're like me and you only have time for a hologram or two in the morning and maybe another few in the evening (if you're lucky), you can extend the mixed life of your two-part developers with press-n-seal

Continue reading "Extending developer life with press-n-seal"

1/2 wave plate holder

nospam@example.com (Michael Harrison) — Wed, 30 Mar 2005 11:31:00 -0800

There are times when you need an inexpensive way to rotate an optic and not too long ago I had just such a need. I purchased a few half-wave plates off eBay some time ago and needed a way to rotate them without breaking the bank. It was time to go to the hardware store and see what I could find.

Continue reading "1/2 wave plate holder"