I found in the web, that Kodak offers holographic glass plates. http://www.kodak.com/cluster/global/en/professional/support/techPubs/ti2526/ti2526.shtml They have an interesting spectral sensivity, in special for the use of red diode lasers (krypton peak at 647nm). My question: Has somebody experience with this plates?
vidar - Tue, Dec 12, 00 02:27:50 AM
Hello,
Interesting, I was sure they had stopped production. The resoloution is around 2000 lines/mm according to the spec. I guess this may be OK for transmission holograms but a bit too small for reflections? It would be great to hear about any experience with these plates. 195.70.188.204
Ronny - Wed, Dec 20, 00 02:21:49 PM
Hei alle sammen, I want to share some info. about these plates that I found in a book. These plates (Type 120-01 or -02) are Kodak's best choice for reflection work. Emulsion thickness (micrometer)=6, Spectral sensitivity <700nm, Resolving power(lp/mm)>2500, Grain size=50nm. Safelight: a safelight filter No.3 (dark green) can be selected. Developer: D-19. Merry Christmas to you all....ronny 62.66.249.137