D&S Driver Plans Wanted
On: Thu, Feb 14, 02 11:43:12 AM
David Asp wrote:
Would anyone be willing to share with me the plans on how
to build OPTION #1: PLANS Plus ALL DRIVER Components kit
from Frank's D&S Laser Driver web site. I am not out to do
anything wrong I just want to use the 50 mW Diode I
purchased to make holograms.
I ordered the plans on Dec 9th and have been waiting. If I
had plans and knew what parts I need I can put together the
driver and maybe even provide help to some of the many
others that want to get involved in this hobby by helping
them build working components fully asembled.
Please email me with help or suggestions on how to make a
Driver.
David.Asp@co.dakota.mn.us
|
RESPONSES
Colin Kaminski - Thu, Feb 14, 02 06:59:58 PM
David,
Many people have gone through the frustation of ordering
from Frank. He seems to only have time to tend to his
business irregularly. He seems to always come through
eventually.
The plans won't help you because the chip is not available.
It was discontinued by Sharp. There are some obsolete part
dealers with lots of 100 but you probably only need one.
I have not heard from him since the beginning of December.
If I hear from him I will point him to your post. 63.193.192.199
David Asp - Fri, Feb 15, 02 11:25:57 AM
Below is the last time I have heard from Frank.
If I had the plans and can get a parts list I know can find
a current Vender for the parts and post it so others can
share the experience of making holograms.
-----Original Message-----
From: Frank DeFreitas [mailto:director@holoworld.com]
Sent: Tuesday, January 22, 2002 7:38 AM
To: Asp, David
Subject: Re: ORDER STATUS
>I Ordered your OPTION #1: PLANS Plus ALL DRIVER Components
kit from you on
>December 9, 2001 and still have not received it. My check
has cleared.
>Could you please give me an idea of when it will be
arriving.
>Thank you.
>
>David Asp
----------------
Hi David, it's Frank. Just got in from another on the road
trip. I have
had your order in my daytimer and have been carrying it
around with me --
but I assure you that I will have this off to you this
week. Sorry for
the delay -- Dec. 9th is a long time ago.
Frank
207.171.99.176
John - Thu, Feb 21, 02 05:07:31 PM
Hey David,
Did you ever find out if you could source the chip from
somewhere else?
john 24.216.219.10
David Asp - Mon, Feb 25, 02 02:20:40 PM
I found a supply of the Sharp IR3C07 IC Driver Chip needed
for building a driver kit.
50pcs $3.75/ea
D/C 1996 new/unused
del: 3-4 days
The Min order is 50 so I thought if I found a few fellow
holographers interested I could buy them and others could
get them at my cost.
send questions to:
David.asp@co.dakota.mn.us
207.171.99.176
Use this form to add your comments to the current forum entry above
| Main Index
| Reload
| Help?
|